Wsm 05-E2B SERIES Especificações descarregar pdf (Página 90)

S-37

03-E2B SERIES, WSM

DIESEL ENGINE

Fan Drive Pulley

1. Lock the flywheel not to turn using the flywheel stopper.

2. [D1403/D1503/D1703/V1903/V2003-T/V2203-E2B]

Remove the fan drive pulley mounting nut (1) using 46 mm deep

socket wrench (5).

[F2803-E2B]

Remove the fan drive pulley screws.

3. Remove the fan drive pulley (2) with gear puller (3).

4. [D1403/D1503/D1703/V1903/V2003-T/V2203-E2B]

Remove the feather key.

(When reassembling)

• Apply grease to the splines of coupling.

• [F2803-E2B]

Install the pulley to the crankshaft, aligning the marks (4) on

them.

• Tighten the fan drive pulley mounting nut or the fan drive pulley

screw to the specified torque.

W1025370

Tightening torque

Fan drive pulley mounting

nut

137.3 to 156.9 N·m

14.0 to 16.0 kgf·m

101.3 to 115.7 ft-lbs

Fan drive pulley screw

313.8 to 333.4 N·m

32.0 to 34.0 kgf·m

231.5 to 245.9 ft-lbs

(1) Nut

(2) Fan Drive Pulley

(3) Gear Puller

(4) Mark

(5) 46 mm Deep Socket Wrench

KiSC issued 05, 2008 A

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 124 125

Sem comentários

Wsm 05-E2B SERIES Especificações Página 90